Field Template 1/2" StripLight Template

All Bulbs

$26.00
-
+
$26.00

Field Template 1/2" StripLight Templates

 Product Features

  • Divided into all of the major food groups of strips; R40 and PAR 38's, MR-16's, T-3's, PAR 56's, PAR 64's, Iris and Far Cyc's
  • Aligned on the patented Pro*Trak 50 system
  • Heat stamped numbers list the length and weight of each striplight
  • Can be used to trace trunions and more useful applications
  • The scaled rulers are reversed

The New 1/2" Striplight Placemat Field Template is divided into all of the major food groups of strips; R40 and PAR 38's, MR-16's, T-3's, PAR 56's, PAR 64's, Iris and Far Cyc's, showing the actual size, weight, cut color, and circuitry combination for every single strip. They're aligned on the patented Pro*Trak 50 system (Showing you the distance required between every strip). The heat stamped portions of striplight on either side of each symbol are pre-measured distances away from the symbol hole.

Across the top is a section of each type of striplight, showing the true distance of each strip to the C-Clamp on the batten. On the left side of each cutout symbol, the heat stamped numbers list the length and weight of each striplight. The small triangle above and below each cutout symbol indicate the center of that striplight. The printing under each cutout symbol indicates the number of lamps and every circuitry possibility for that striplight. To the right of each group is a small folded back Post-it (with scissors) indicating the true cut color size of that type of strip.

The small vertical slits on either side of each cutout symbol can be used to trace trunions (indicating that strip as a groundrow unit). Horizontal and vertical arrows are included in the PAR 56 and PAR 64 groups, indicating the axes of the lamps. Two sizes of circuitry symbols are on the right hand side, along with a handy set of small circles (to indicate twofering). A set of arrowsis included (if you can't draw those triangles, Hal). Below the twofer circles is a scaled scenery bumper. The scaled rulers are reversed (So you don't have to flip the template like a pancake to measure distances left and right from centerline).

Here's an image of the 1/2" Striplight Placemat Stencil, the new Reference Manual in Plastic that's cutting down the time required to draft striplights onto a light plot. This delicate little puppy was unveiled at the USITT Convention in Kansas City.

What's that you say? Well, yes, it’s actually not that delicate. It can slam dance in a brief case with the best of them. Hmm? Well, true, it’s not really that small—actual size is just a smidgen smaller than a legal-sized piece of paper. And yes, you have a point; it’s not really a puppy, is it?

I guess you’re right. (*sigh*). It's a pig. But it's a functional pig.

The New 1/2" Striplight Placemat Stencil is divided into all of today’s major strip food groups; LED units, including Seledor, Color Kinetics, and Altman, not to mention tungsten-based units such as ETC Multi-Pars, R40 and Par 38s, MR-16s, T-3s, Par 56s, Iris and Far Cycs. And there’s information listing the actual size, weight, cut color, and circuitry combination for every single strip. The cutouts are all aligned on the patented Pro*Trak 50 system (Showing you the distance required between every strip).

Let’s get up close and personal to this bad boy: The printed portions of striplight on either side of each symbol are pre-measured distances to adjacent striplights from the symbol hole. So drafting two striplights becomes simple: Trace one striplight, slide the template sideways so that the traced symbol lines up under a printed portion, and trace the same symbol again. The two striplights are now accurately pre-spaced apart. Done is beautiful. Cue the trumpets, and squeeze the weasel.

But wait -- There's more. Lots more! More than any other striplight template more!

  • Across the top is a sectional view of each type of striplight, showing the true vertical distance between each strip to the C-Clamp on the batten.
  • On the left side of each cutout symbol, the printed numbers list the length and weight of each striplight.
  • The small triangles above and below each cutout symbol indicates the center of that striplight. And each one comes with a little hole, so you can mark that center point directly on the drafting.
  • The printing under each cutout symbol indicates the number of lamps, and every circuitry possibility, for that striplight.
  • On the right of each group is a small folded back Post-it (with a pair of scissors) indicating the cut color size of that type of strip.
  • The vertical slits on either side of each cutout symbol can be used to trace trunions (indicating that strip as a groundrow unit).
  • Horizontal and vertical arrows are included in the PAR 56 group. Those can be drawn to indicate the axes of the lamps, or the focus direction of the entire unit.
  • Three sizes of circuitry symbols are on the right hand side of the template (including horizontal rectangles and diamonds! Yowsah!)
  • Underneath the top pair of them is a handy set of small circles (to indicate twofering).
  • Below the third set of circuitry symbols is a scaled scenery bumper.
  • The 1/2” scale rulers that run along each side of the template are reversed one side to the other. (So you don't have to flip the template like a pancake to measure distances left and right from Centerline).

And this potent appliance of practical purpose is packaged into one precise piece of piggy plastic. Whew.

Yes, it's a pig. It can't do anything about that. But it does more than any other striplight template out there. It's a Reference Manual in Plastic.

 

 

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

Recently Viewed Products