Unison Foundry™ Relay Controllers offer seamless, reliable distributed power control for Unison Paradigm® and Mosaic® lighting control systems. The Foundry Relay Controller comes with two outputs rated for 20 amps total load of on/off control for all types of lighting fixtures and provides single- or dual-zone operating modes for added flexibility. It accepts DMX control in, and is configurable via RDM. Foundry Relay Controllers are also available with a fully isolated 0-10V control output, making them compatible with almost any low-voltage driver. With Foundry you can build a power infrastructure capable of handling todays LED and fluorescent fixtures – and whatever the future brings.

 Features:

• Single- or dual- zone control of fully-rated relays for up to 20A total controlled load
• Available fully-isolated 0-10V control outputs for one or two zones
• DMX512A control input
• Remote configuration over RDM
• Local pushbutton configuration controls
• Plenum rated and designed for simple j-box installation

  Specifications:

• Functional:
  • Control for individual fixtures, zone power
  • Supports USITT DMX512-A (ANSI E1.11)
  • Supports RDM (ANSI E1.20)
• Mechanical:
  • Constructed of injection-molded ABS plastic
  • Button interface and LED indicators for configuration
  • Half-inch conduit knockout mounted
  • Mains-voltage wiring exits through knockout mount
  • 0-10V dimming control wiring exits through knockout mount
  • DMX wiring connects to side of controller
• Electrical:
  • 120V-277V, 50/60Hz power input
  • Normally Open (NO) 20-amp fully-rated relay
  • Supports lighting and plug loads
  • UL and cUL LISTED (Conforms to UL 508 and UL 2043)

Applications for the ETC UFR2-LV:

• Arena and stadium suites
• Office buildings
• Conference and meeting rooms
• Healthcare facilities
• Houses of worship
• Classrooms
• Hospitality and restaurants
• Retail

ETC UFR2-LV Features:

• Switched power control of two circuits with 0-10V dimming
• 20A fully-rated relays for use with general purpose, tungsten, fluorescent and LED loads
• Supports plug loads
• 120/277VAC power input
• DMX controlled and RDM configurable

ETC UFR2-LV Specifications:

• Ambient Environment:
  • For indoor use only.
  • Rated for plenum use.
  • 32°F to 104°F (0°C to 40°C) operating temperatures in 5–95% non-condensing humidity.
• Electrical Specification:
  • The 0-10V Controller Supports:
  • Power input 120–277VAC, 60 Hz
  • Maximum load rating is 20A (total connected load)

• NOTE: The maximum load on the 0-10V Controller can be split between the two relay outputs in any combination required for the installation, but cannot exceed 20A total connected load for the controller.
  • Independent control for 0-10V fluorescent ballasts and/or LED drivers, each is capable of sinking 100mA
  • Supported Load Types (all voltages):
    • 20A fully-rated relay for use with general purpose, tungsten, fluorescent, and LED lighting loads.
  • Compliance:
    • UL and cUL listed
    • Conforms to UL 916 (Energy Management Equipment) and UL 2043 (Plenum rated)
  • Physical:
  • Size (H x W x D): 2 x 3.5 x 3 in
  • Weight: 0.75 lbs